Pipeline channels, pipe racks and pipe boxes. The pipeline service facilities on the experimental platform are usually introduced from below the ground or from a pipeline well into the pipeline channel in the middle of the experimental platform, and then lead out of the platform for use. The width of the pipeline channel is usually 300-400mm
The design of a laboratory with good quality and good service needs to fully consider functional scalability, so it needs to be forward-looking when designing, and future development should be considered at the beginning of the design. Under the premise of fully considering future development
Analytical balance is a common instrument necessary for the construction of chemical laboratories. High-precision balances have certain requirements for the environment: vibration, dust, wind, direct sunlight, corrosive gas erosion, and relatively constant temperature. Therefore
1. On-site inspection of the laboratory benches, decoration, water and electricity, ventilation, general air-conditioning, and purification air-conditioning of the completed project are in accordance with the construction contract and construction drawings. If there are centralized air supply and wastewater treatment and other related projects are also within the scope of inspection Inside.
The high-temperature drying oven, muffle furnace, etc. are placed in the pre-treatment room. Various reagents are often used in the pre-treatment room, some of which have extremely low ignition and flash points. The high-temperature oven is often unattended operation for a long time
Professional and scientific laboratory planning can effectively realize the effective layout of internal space. By fully considering the internal structural system of the laboratory, the professional functions of each part can be reasonably divided. For example, where is the appropriate place
Total number6
Total pages1 |
Current page1
9The first page
7Previous page
Next page8
Last page:
Jump